Qualstar TLS Library-Specific InformationQualstar TLS Library-Specific Information

Supported Drives

AIT, SAIT and LTO formats are supported.

Minimum Supported Firmware Level

The minimum supported firmware level is 003E.  If the firmware in your unit is at a lower level that this, please contact your library support organization for an upgrade.

Medium Changer Device Driver Installation

Operating system Driver
 Windows 2000     Qualstar
 Windows Server 2003    Qualstar 
 Windows Server 2003 R2 X32 & X64    Qualstar 

Device Driver Installation

The device driver for these drives is installed using the Windows Update service, as follows:

  1. Right-click on 'My Computer' and select 'Manage'

  2. Select 'Device Manager' from the left pane and select 'Unknown Medium Changer' in 'Medium Changers' from the right pane.

  3. Double click on the device and select the 'Driver' tab.

  4. Click 'update driver' to launch the driver update wizard, allow the wizard to connect to the Internet and click 'Next'.  Select 'Install the software automatically' and again click 'Next' When the wizard finished installing the device driver, click 'Finish'

If the driver fails to install for some reason, please visit the Qualstar support site.  Follow the installation instructions on the site.